|
|
|
|
GPJ-80
气动管子坡口机 GPJ-80
pneumatic pipe beveling machine
|
 |
便携式。采用压缩空气为动力，内涨胎定位，自定管子中心，可对不同材质的圆管作V.U型玻口，及倒梭、倒角、平面等加工，俗称“便携式机床”。
Portable
type. Driven by pneumatic motor located
by inner expansion device. Automatically
centering. Applicable for types VU beveling
process for different materials. It's
called "the portable machine tool".
|
|
|
◆
便携式.7kg/台,空气压力0.6Mpa.
◆
可加工管子内径28-75mm,一次切削壁厚≤10mm.
◆
轴向进刀行程≤35mm,气动马达功率440W.
◆
管子内径: 28-75mm.
◆
Portable 7 Kg/set, air pressure 0.6Mpa
◆
Proceedable pipe inside
diameter 28-75mm,once cutting wall thickness≤10mm
◆
Axle feed stroke ≤35mm,pneumatic motor power
440W.
◆
Inside diamster 28-75mm.
|
|
|
GPJ-80-1
气动管子坡口机 GPJ-80-1
pneumatic pipe beveling machine
|
|
便携式。采用压缩空气为动力，内涨胎定位，自定管子中心，可对不同材质的圆管作V.U型玻口，及倒梭、倒角、平面等加工，俗称“便携式机床”。
Portable
type. Driven by pneumatic motor located
by inner expansion device. Automatically
centering. Applicable for types VU beveling
process for different materials. It's
called "the portable machine tool".
|
 |
|
|
◆
便携式.8kg/台,空气压力0.6Mpa.一次切削壁厚≤10mm.
◆
该机在GPJ-80基础上,通过更换主轴形式,使加工范围扩大至φ18-φ75mm.
◆
轴向进刀行程≤35mm,气动马达功率440W.
◆
管子内径: 18-75mm.
◆
Portable 8 Kg/set, air pressure 0.6Mpa. Once
cutting wall thickness ≤10mm.
◆
This machine is at the
base ofGPJ-80 and through changing the main
shaft form so as to lst the proceeding scope
enlarge diφ18-φ75mm.
◆
Axle feed stroked ≤35mm,pneumatic motor power
440W.
◆
Inside diamster 18-75mm.
|
|
|
GPJ-150
气动管子坡口机 GPJ-150
pneumatic pipe beveling machine
|
 |
便携式。采用压缩空气为动力，内涨胎定位，自定管子中心
，可对不同材质的圆管作V.U型玻口，及倒梭、倒角、平面等加工，俗称“便携式机床”。
Portable
type. Driven by pneumatic motor located
by inner expansion device. Automatically
centering. Applicable for types VU beveling
process for different materials. It's
called "the portable machine tool".
|
|
|
◆
便携式. 12.5kg/台,空气压力0.6Mpa.
◆
可加工管子内径68-145mm,一次切削壁厚≤16mm.
◆
轴向进刀行程≤50mm,气动马达功率580W.
◆
管子内径: 68-145mm.
◆
Portable
12.5 Kg/set, air pressure 0.6Mpa
◆
Proceed
able pipe inside diameter 68-145mm,once cutting
wall thickness≤16mm
◆
Axle
feed stroked ≤50mm,pneumatic motor power 580W.
◆
Inside
diamster 68-145mm.
|
|
|
GPJ-350
气动管子坡口机
GPJ-350 pneumatic pipe beveling machine
|
|
便携式。采用压缩空气为动力，内涨胎定位，自定管子中心
，可对不同材质的圆管作V.U型玻口，及倒梭、倒角、平面等加工，俗称“便携式机床”。
Portable
type. Driven by pneumatic motor located
by inner expansion device. Automatically
centering. Applicable for types VU beveling
process for different materials. It's
called "the portable machine tool".
|
 |
|
|
◆
便携式. 42kg/台,空气压力0.6Mpa.
◆
可加工管子内径145-300mm,一次切削壁厚≤20mm.
◆
轴向进刀行程≤55mm,气动马达功率740W.
◆
管子内径：145-320mm.
◆
Portable 42 Kg/set, air pressure 0.6Mpa
◆Proceed
able pipe inside diameter 145-300mm,once cutting
wall thickness≤20mm
◆
Axle feed stroked ≤55mm,pneumatic motor power
740W.
◆
Inside diamster 145-320mm.
|
