返回>>

LGK₈-40 空气等离子切割机     LGK₈-40 air plasma cutting machine

    该机采用压缩空气为气源，可对不锈钢、碳钢、铜、铝等导电材料进行任意几何图形的切割。
    具有：切割材料广、速度快、切口窄等优点。
    This machine uses the air compressor for the air supply. The machine can clit the stainless steel, carbon st6el, copper and aluminum in any geometric form, with the advantage of wide cutting, high speed and narrow cutting edge. 

◆ 推车式，宜流动作业，切割簿板最佳。 

◆ 配置LG-75º/40A割炬(接触式),使切口更为平滑.

◆ 输入三相380V,50HZ;容量11.2KVA,额定输出40A. 

◆ 暂载率60%,空气压强0.4-0.6MPa，空气流量100L/min.

◆ 切割中、簿板切割能力≤12mm.

◆ Car pusher type, suitable for flow operation, it's best to cut the thin plate.

◆ Dispose LG-75º/40A cutting torch (touch), let the cutting edge more smooth.

◆ Input three-phase 380V,50HZ; the capacity 11.2KVA,the rated  Output 40A.

◆ Temporary loading rate 60%, air pressure 0.4-0.6MPa, air now 100L/min.

◆ Cutting the middle thin plate, The cutting ability ≤12mm.

LGK₈-100 空气等离子切割机   LGK₈-100 air plasma cutting machine

    该机采用压缩空气为气源，可对不锈钢、碳钢、铜、铝等导电材料进行任意几何图形的切割。
    具有：切割材料广、速度快、切口窄等优点。
    This machine uses the air compressor for the air supply. The machine can clit the stainless steel, carbon st6el, copper and aluminum in any geometric form, with the advantage of wide cutting, high speed and narrow cutting edge.     

◆ 推车式，135kg/重量,切割中板最佳。 

◆ 配置LG-75º/100A非接触式割炬,更易于切割表面不平或有绝缘层的材料.

◆ 输入三相380V,50HZ;容量24KVA,输出分50A、100A二档，适宜不同厚度的材料。 

◆ 暂载率60%,空气压强0.4-0.6MPa，空气流量130L/min.

◆ 切割中板，切割能力≤35mm.

◆ Car pusher type, Weight:135Kg, it's best to cut the middle plate.

◆ Dispose LG-75º/100A cutting torch (no-touch), it's easier to cut the materials of rough or insulated layer surface.

◆ Input three-phase 380V,50HZ; the capacity 24KVA,the Output 50A,100A,suitable for different thickness materials.

◆ Temporary loading rate 60%, air pressure 0.4-0.6MPa, air now 130L/min.

◆ Cutting the middle plate, The cutting ability ≤35mm.

LGK₈-200 空气等离子切割机   LGK₈-200 air plasma cutting machine

    该机采用压缩空气为气源，可对不锈钢、碳钢、铜、铝等导电材料进行任意几何图形的切割。
    具有：切割材料广、速度快、切口窄等优点。
    This machine uses the air compressor for the air supply. The machine can clit the stainless steel, carbon st6el, copper and aluminum in any geometric form, with the advantage of wide cutting, high speed and narrow cutting edge.     

◆ 推车式，185kg/重量,切割中厚板最佳。 

◆ 配置LG-75º/200A非接触式割炬.

◆ 输入三相380V,50HZ;容量43KVA,输出分120A、200A二档，适宜不同厚度的材料。 

◆ 暂载率60%,空气压强0.5-0.8MPa，空气流量180L/min.

◆ 切割中厚板，切割能力≤60mm.

◆ Car pusher type, Weight:185Kg, it's best to cut the middle thickness plate.

◆ Dispose LG-75º/200A cutting torch (no-touch).

◆ Input three-phase 380V,50HZ; the capacity 43KVA,the Output 120A,200A,suitable for different thickness materials.

◆ Temporary loading rate 60%, air pressure 0.5-0.8MPa, air now 180L/min.

◆ Cutting the middle plate, The cutting ability ≤60mm.